"ACCURA" MODEL ACT- I
Mini R&D
9STN “D” Tooling / 11 STN “B” Tooling / 13 STN “BB” Tooling & 9D + 9B Tooling Combo
TYPE | ACT-I 9 | ACT-I 11 | ACT-I 13 | ACT-I COMBO |
NUMBER OF STATIONS | 9 | 11 | 13 | 9D+9B |
TYPE OF TOOLING (AS PER EU1) | D | B | BB | D+B |
OUTPUT – TABLET / HOUR* (MIN. /MAX.) | 5400/ | 6600/ | 7800/ | 5400/ |
(Single Layer) | 18900 | 23100 | 47600 | 18900 |
OUTPUT – TABLET / HOUR* (MIN. /MAX.) | 5400/ | 6600/ | 7800/ | 5400/ |
(Bi-Layer) | 10800 | 13200 | 15600 | 10800 |
Turret RPM (Min - Max.) (Single Layer) | 10 -35 | |||
Turret RPM (Min - Max.) (Bi-Layer) | 10-20 | |||
MAX OPERATING PRESSURE MAIN (KN) | 100 | 100 | 100 | 100 |
MAX OPERATING PRE –PRESSURE (KN) | 100 | 100 | 100 | 100 |
MAX TABLET DIAMETER (MM) | 25 | 16 | 11 | 11 |
MAX. TABLET THICKNESS (MM) | 8.5 | |||
DEPTH OF FILL (MM)(WITH THREE DIFFERENT LOWER TRACK) | 3-10 | |||
8.5-14 | ||||
12.5-20 | ||||
UPPER PUNCH ENTRY MAIN (MM) | 1 To 6 | |||
UPPER PUNCH ENTRY PRE- COMPRESSION (MM) | 1 To 6 | |||
POWER – TOTAL (KW/HP) | 2.325/3.1 | |||
MAIN ELE. MOTOR (KW/ HP) | 2.25/3, x 1440 RPM | |||
MAIN PRESS ROLL ELE. MOTOR (KW/ HP) | 0.025/0.0335 x 1440 RPM | |||
PRE.PRESS ROLL ELE MOTOR(KW/HP) | 0.025/0.0335 x 1440 RPM | |||
WEIGHT ADJ. ELE MOTOR (KW/HP) | 0.025/0.0335 x 1440 RPM | |||
HOPPER CAPACITY | 4 Litres | |||
OVERALL DIMENSIONS (WITH CLOSE GUARD) (CM) | 86Lx77Wx159H | |||
OVERALL DIMENSIONS (WITH OPEN GUARD) (CM) | 169.3Lx138.3Wx200.7H | |||
Case dimensions (cm) | 110x100x175 H | |||
NET WEIGHT (Kg.) | Approx. 850 | |||
GROSS WEIGHT (Kg.) | Approx. 1050 | |||
UTILITES | 1) Suction Air :- 150 CFM | |||
2) Power Supply :- 415 V,3 Phase, 50 Hz |
- Pre-pressure and Main pressure Could be changed depending on the Size of the compress and filling depth, powder or granulation. It is dependent on the physical specification of the used material for the compress.
- The above specification is the subject to change without prior notice for the technical development.
- It is Recommended not to use large depth of fill, minimum tablet thickness and maximum compression pressure for maximum performance consistently. Technical rights to change catalogues, specification and features are reserved with the manufacturer. Actual output may very against indicated output on the product under compression and RPM on lower side.
|
Related Products